View Single Post
Old 08-03-2012, 02:16 AM   #9
sho
Senior Member
 
Join Date: Mar 2012
Drives: s2000
Location: Sydney
Posts: 159
Thanks: 7
Thanked 57 Times in 33 Posts
Mentioned: 4 Post(s)
Quote:
Originally Posted by kharn83 View Post
appreciate the response guys,

it does sound like gears or a clutch gnashing with another surface, and from what i know it doesnt sound like pinging, from what i understand pinging is sounds a bit like marbles hitting other marbles, whereas the sound im experiencing is quite loud, much louder than pinging (which ive experienced in a prior car), and the sound only occurs just as the engine starts to accelerate

i feel its drive train related as the sound happens at the exact time that the engine is about to start to rev upwards, i.e it would be the same time that you would expect a loose drive shaft to knock or something like that, but instead i get this kind of clutchy/gearboxy gnashing / crunch sound.

also with the engine pinging, id assume id hear it after i begin full load acceleration, but the sound only happens just on the initial applicaiton of the throttle. once continuing application of throttle no such noises are apparent

only reason why i am applying this kind of load in such a high gear is just to diagnose any potentially issues with the car and help it break in at a different load / rpm combination

thanks again for the responses so far though!


your pretty much getting the same issue that i'm getting and now after i got it back from the service centre and foreman giving it a road test, its a lot more noticeable and worse.

what happens if you back off the throttle and then accelerate again? do you hear it? and if so, does this noise comes back intermittently ?

Your best bet is to call your service centre and let them diagnose the issue and raise it up with toyota aust. I do think its pinging but i'm no Toyota mechanic.
sho is offline   Reply With Quote