Mounted the APR GTC200 wing finally. This one is a really hard install by yourself if you have the duck tail installed. Some install tips:
- temporarily remove stock spoiler. Would have made install much easier
- cut larger holes and use M6 fender washers, at least in a few spots
- have spare M6 washers. you're gonna drop them into the trunk
- centering the mounts and wing is very tricky. Don't measure. Use stock centering points like the camera, trunk button, and antenna. I used a laser level to draw a line between all of these
- square and parallel the mounts on the wing before you pick the permanent mounting points on the trunk
- my endplates REQUIRED tapping the M6x1.0 holes in the wing to screw in the bolts. Failure to do so would have caused the bolts to snap. Shoulda seen the chips that came out