Quote:
Originally Posted by turboencabulatr
Has anybody experienced the PCV system sucking a large amount of oil into the engine attributed to adding a GReddy Oil Pan Baffle Plate (or other brand)?
Rebuilt engine with about 100 miles. Naturally aspirated engine. Was driving some canyons at less than 5000 rpms. Did some hillcrests and shortly after a huge amount of oil smoke billowing out the exhaust. I confirmed that oil came through the PCV in the non-check valve line from the block direct to top of manifold. I pinched the line and drove the car for another few miles until oil in the exhaust burned off. 30+ miles with no issues since.
|
I was about to ask if you had lofted it. Then I went back and read again.