Lots of little things done with some extra time on hand. Still waiting for a lot of parts to arrive.
Wheels! I can't get my phone to convey the color and how nice the finish is, almost don't want to race them
shipping was a week from door to door and no problems with customs. So overall a very pleasurable experience and look forward to ordering my other sets now that I know fitment is right.
Fitment! Room for activities!
Spindle centered in strut hole, wheel has about 6mm clearance at +40ET, no spacer.
Front fenders do not need rolled at 3.5" or above, I will roll mine anyways as I do it on every race car just in case.
We could easily fit 11" wheels in the rear under stock panels. Food for thought.
Finished the intake, just did the copy and past of a vast majority of ls swaps as it just works. K&N 2013 ls3 corvette intake.
Decided to get the dash panel done, going to mount the gauge panel on the column behind the wheel, that way it always moves with the wheel position and mount the canbus pad down low on the tunnel or maybe up high on the cage, will decide once parts get here. Oh park brake is installed as well in front of the shifter.
