Quote:
Originally Posted by askho
I have a Race Capture MK2, so no analog input without either upgrading to a race capture pro, or buying their analog kit.(But i figure if i get the upgrade kit i might as well just get a race capture pro). My line of thinking is if I can broadcast the oil pressure message from the AEM oil pressure gauge onto the factory bus I can just program the race capture app to read the message via the spec i posted in the original post.
Also FYI this is just me planning for how to deal with data logging on my gen 2 GR86 that still hasnt shipped yet... The OBD2 plug would not work for my case as I believe most can bus messages are filtered on the plug. I'll be making my own little dongle to plug into to the noise generator ECU for can data.
|
correct, the GR86 has atleast 4 "networks" connected via a gateway. the OBD2 is standalone and will not spit out anything below canbus ID 0x7F0 i think. if you want to connect to the "body" network. you can use the ASC connector, theirs another network that connects to a "options" connector behind the radio, this one is connected to the gateway and also the telemetric unit. Then the powertrain network thats just safely critical data.