Quote:
Originally Posted by timurrrr
...solutions such as OBDLink MX+ which only supports operating in one mode (OBD-II or CAN) at a time.
|
@
timurrrr
How does the OBDLink MX+ get configured to run in OBD2 mode vs running in CAN mode?
I just got one and plan on having the following
- OBD2 splitter
- OBD2 gauge on one end (oil temp, coolant temp, rpm, speed)
- ODBLink MX+ on the other
- RaceChrono linked up to the OBDLink MX+ but only through CAN (oil temp, coolant temp, speed, rpm, throttle position, brake position)
If I configure RaceChrono only with the CAN ID's you mentioned on GitHub is that considered putting the OBDLink MX+ in CAN mode? I looked through the OBDLink MX+'s documentation but couldn't find any mention of "modes" anywhere.
BTW thanks for the work on this project. I'm going to take a crack at building one for a friend's Gen 2 after I get my own situation sorted.