Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Alignment limits with RCE coilovers and Vorshlag camber plates

Kulebrero1 · 11-10-2022, 01:16 PM

I installed a set of RaceComp Engineering Tarmac 2 coilovers and Vorshlag camber plates.

Took it to get an alignment. They could only get 1.7 degrees. Was hoping for 4-5 for track duty.

What am I missing?

The car is not even that low. There’s about a one inch gap from the tire to the fender (4.5” from the pinch weld to the ground).

11-10-2022, 01:16 PM	#1
Kulebrero1 Member Join Date: Mar 2022 Drives: Gr86 Location: VA Posts: 49 Thanks: 28 Thanked 5 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Alignment limits with RCE coilovers and Vorshlag camber plates I installed a set of RaceComp Engineering Tarmac 2 coilovers and Vorshlag camber plates. Took it to get an alignment. They could only get 1.7 degrees. Was hoping for 4-5 for track duty. What am I missing? The car is not even that low. There’s about a one inch gap from the tire to the fender (4.5” from the pinch weld to the ground).