For sale are Tomei EL headers and overpipe. Original owner. Overpipe is coated with Cerakote C-7900 Glacier Titanium.
These are the dyno results that I got with the headers prior to installing the overpipe; I highly recommend @
Wayno OFT tunes
http://www.wayneroms.com
https://www.ft86club.com/forums/showthread.php?t=126519
Going by the seat of the pants, I would say the overpipe added a couple of hp and lb-ft of torque. Not a huge difference but every little bit helps.
These will come with used Tomei gaskets (they are metal and in good shape), new Tomei hardware, and new Nord-lock M10 washers for all of the header and over pipe fasteners.
For installation, these are the torque values:
Header > engine: 22 lb-ft
Header > overpipe: 26 lb-ft
Overpipe > front pipe: 31 lb-ft
Front pipe > exhaust: 13 lb-ft
Front pipe > transmission: 37 lb-ft (tighten this last)
O2 sensors: 13 lb-ft if using O2 sensor socket; 16 lb-ft if not
To remove the old header and overpipe, loosen from the front pipe > exhaust connection first and move toward the front.
To torque down the new header and overpipe, tighten from the header > engine connection first and move toward the rear. Torque the front pipe > transmission last.
Asking $500 shipped to the continental US.
Photos:
https://photos.app.goo.gl/jEZVpqRkabdecqdv5
https://photos.app.goo.gl/KG9WFMXqbfGpu8iH9
https://photos.app.goo.gl/AKoWzVbBmc7u9c5h9
https://photos.app.goo.gl/Un2Y48VMJBr9jhT2A
https://photos.app.goo.gl/ggrQa68b4Y3dfkNw5
https://photos.app.goo.gl/xgTRHsJ3LBLaXusMA
https://photos.app.goo.gl/6dqsRMPi3yzC47xh8
https://photos.app.goo.gl/6Wb3ThX2G8ubci8u5
https://photos.app.goo.gl/hJVD8EWpTA3qSiuy5
https://photos.app.goo.gl/rDPPK75fn8K6Y4yp8
https://photos.app.goo.gl/sLNdBuVYbTsy1TcY8
Any questions, feel free to ask, and thank you for looking.
Edit: I realized that I forgot to include a sign in the photos with my username, date and FT86club.com -- I will correct this ASAP.
Done:
https://photos.app.goo.gl/weq4SrXiCmSgrJ8D9