Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

MotoX16 · 10-01-2022, 11:23 PM

Well I have another track day coming up so figured I'd finally make some more improvements to my setup. I cut a decent hole in the fender liner behind the oil cooler and zip tie stitched some metal screen in I found at Ace Hardware. Not the prettiest but I think it'll work. Also opened up the front bezel a little bit more. I'll keep an eye on my temps at the track and report back after

10-01-2022, 11:23 PM	#31
MotoX16 Senior Member Join Date: Jan 2019 Drives: 2017 Subaru BRZ Location: Minneapolis, MN Posts: 199 Thanks: 62 Thanked 95 Times in 54 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Well I have another track day coming up so figured I'd finally make some more improvements to my setup. I cut a decent hole in the fender liner behind the oil cooler and zip tie stitched some metal screen in I found at Ace Hardware. Not the prettiest but I think it'll work. Also opened up the front bezel a little bit more. I'll keep an eye on my temps at the track and report back after __________________ 2017 Subaru BRZ PP FBM Turbo Kit: GTX3076R - HRI FlexFuel Tune - 3" Turboback Exhaust - ID1000cc Injectors - Walbro 485 Fuel Pump - FBM Oil Pan - FBM Oil Cooler - Killer B Oil Pickup - FBM Catch Can - FBM Radiator w/Fan Shroud - Clutch Masters FX400 - Verus Clutch Fork/Pivot - IRP Shifter - Cusco Engine/Trans Mounts - RCE Yellow Springs - PS4S 245/40/17