Quote:
Originally Posted by epson1
Its called warping your rotors. I'm almost scared people want a BBK kit for a Camry.or know the oem pad material. Its a camry....
|
This is not warped rotors. I am linking an article to this.
http://www.stoptech.com/technical-su...nd-other-myths
Anywho, why are you dissing the Camry? Both gen6 and gen7 with the V6 and SE trim will smoke the FT86 for lunch, breakfast, and dinner in most daily driving situations. 0-60 times in the Camry on 91 octane and good set of tires ranges between 5.8 - 6.2 seconds. The sequential 6 speed is not that bad either, and once the Camry is in 4th gear (1:1), game over dude.
The SE has various chassis reinforcements such as an underfloor brace, V brace behind rear seatback (no rear folding seats), and thicker side brackets. In the suspension department, it has 15% higher spring rates, 50% higher damping rates, stiffer anti roll bars, strut brace, stiffer bushings, lower assist PS pump and lower ratio rack. It also sits 0.5" lower. The 17" alloys are issued with 220 tread wear compound. What all this means is that the SE is much more composed then other Camrys.
Weaknesses: FWD (obviously), weight and brakes. Still, in daily driving situations, don't challenge a Camry SE V6 unless you want your ass handed to you.