Quote:
Originally Posted by MaxwellSlides
I haven’t adjusted the pedal at all I just left it stock. I went ahead and drained the transmission even further and waited til it stopped weeping. But now the car won’t start. I took it to a dealership a while ago and they suspected a wiring issue but I’m not even sure where to start with that. I changed the throw out bearing because I thought it was getting stuck on the retainer cover (which ended up not even being that worn) but my bearing was pretty whooped so I made the change. Whenever it does this I pop the clutch in 1st while the car was rolling I managed to get it started.
Any idea? I might just post in another forum bc I feel this is a deeper issue.
|
Check that the ground strap to the bell housing is attached/clean/tight.