Quote:
Originally Posted by toast
I'm getting the same noise on the driver side, stock struts on RCE yellow springs. Started a couple months ago with a single pop when backing up and turning out of my driveway. It is now several quick pops when in reverse and then a couple again when moving forward, all with the wheel cranked pretty hard. I checked sway bar end links on both sides, went so far as to remove one endlink and drive around that way. No change. I replaced the driver side strut top hat today. No change.
This is the first time I've seen someone suggest the sway bar itself needs to be lubed - I can't rule that out since I never disconnected both end links, the bar still would have been moving around. Going to try that next.
Simulating turning by putting a low profile jack under the tire doesn't result in the clicking. I think it requires suspension movement with different loads on each side along with steering turns.
I'll update after lubing up the sway bar mounts.
|
Hey mate,
Sorry to revive
Did you manage to fix it?