View Single Post
Old 08-19-2022, 09:00 PM   #9
AussieBRZ
Senior Member
 
AussieBRZ's Avatar
 
Join Date: Aug 2022
Drives: WRB BRZ
Location: Australia
Posts: 118
Thanks: 14
Thanked 52 Times in 37 Posts
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Check manifold pressure at idle should be round 0.4 bar or 4 psi with just ignition on engine stoppedshohld read 14 psi or 1 bar


if the monifold pressure donest go down to arround 0.4 bar when idling you likely have intake leak


also check the long term fuel trim at idle if its way positive like 15-20% likely exhaust leak
see if afr ais stagle round 14.7 at idle when warmed up if not you got fuel issues. If its hunting up and down fairly quickly like to 16 then doen to like 12 its usually the 02 sensor cone bad
AussieBRZ is offline   Reply With Quote
The Following User Says Thank You to AussieBRZ For This Useful Post:
96z2 (08-21-2022)