[Petah78]

Originally Posted by Petah78

As a datapoint, i changed my factory fill this past weekend @ 1k miles. I used a kitchen strainer as the oil drained but caught nothing. I still have the old oil filter and will perform surgery on it later this week and report back.

Sorry for the delay, i had family in town for the past couple weeks thus the delay in surgery of the oil filter. Below are pics of my factory oil filter that was changed out @ 1k miles.

- There are definitely silicon of all colors (green, red and grey) in there.
- The grey colored were rarer but larger in size.
- When i drained the oil, the kitchen strainer that i used was fine enough that it should have at least caught some of these pieces if there was any. But the strainer didn't catch anything.
- Was driven like a granny since break in. Maybe 20% throttle and no more than 4500 rpms.