Quote:
Originally Posted by NoHaveMSG
The grimmspeed gaskets work pretty well. I have used a few sets and always leak free. If you get any flange warping, or if it is not flat, the reflex is the only gasket that will seal it.
|
Noted. Did some more reading and OEM gaskets will work so I'm running with that as a short-term (unless it just works). The bolts that come with it are designed to work with the PLM overpipe so need to figure out an alternative for that. Was hoping I could find dimensions somewhere but I'll have to wing it, I guess. Can't find anywhere that can confirm if I can reuse the original hardware or not.