Quote:
Originally Posted by blsfrs
As I understand it, oil to water heat transfer is better than oil to air transfer. Is there some way to estimate the size of an air cooler vs the size of a water cooler.
I have a JR dual rad. At my last event I was running the same oil temps as a guy that had an oil to air (I don't know what brand or size).
|
Air to Air will have more capacity and better temps. But on my Gen 1 using my JR Dual Rad and NA I have not any concerns at the tracks I run here in SoCal with my setup. Adding boost or more heat the Dual Rad will not be able to keep up.
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's