Quote:
Originally Posted by tomm.brz
you need to reduce timing in base timing b at limiter to make it softer
Hysteresis at fuel cut of around 50rpm as you already have should be good enough though
|
Softer you mean like the one that comes standard in the oft tunes?
it was a hysteresis of 25rpm and feels like it only holds at 7600rpm, which is not what i want. Am seeking something like in the video link down below
Start at 2:15.
His limiter is really close to the limiter when in neutral.
I tried dropping it to 7450 with a hysteresis of 50rpm (shown in the picture below) cause i saw a difference in the base b table between the 7450 and 7600 values, but didn't change anything in the timing values cause am kinda new to this and i don't wanna mess up things.
should I turn it back up to 7600 with a 50 hysteresis and change dem timing values, how much should the values be? and at all loads or some of em...?
