Quote:
Originally Posted by spcmafia
What you see above is the Master Cylinder Assembly which sits above the Gas Pedal. That rod contains a rubber seal I believe that can get dry, along with the rod, rub those together, and bam, goose honk noise. Either use a spray type of lubricant, or really get in there with Toyota recommended (NICHIMOLY N-13).I went with Mobil-1 red grease.
|
Same here. I was actually a bit surprised no one mentioned it in any of the threads about the squeaky clutch, but it seemed a pretty obvious place to lube. I sprayed some lube there together with greasing the clutch fork pivot.