[Wally86]

Originally Posted by Infinity3000

Hi,
I completed this mod to my 86 recently and thought I'd share



I've used a modified "TRD v2 Style" rear lip, a metal mesh panel, and some rubber edging, and replaced the stock reverse/fog light with one designed for a Ford F-150.

First step was to use a Dremel to cut the rear bumper off, leaving space to mount the new reverse/fog light.



I then tidied up the edges with rubber edging. You could leave it like this if you want a more aggressive look.



Cutting the mesh to the right shape following the contours of the rear lip was the hardest part, but pretty happy with how it turned out. There are two metal brackets holding the rear lip on (mounted to the exposed ends of the heat shield bolts) as well as the two stock push clips at each end. The mesh is held in place with sikaflex.



You can cut the hole in the mesh wherever you want, so could suit a variety of exhausts. I have the MXP Comp RS catback.

That looks SO good!