|
Yeah, the base has no amp.
There's some speculation that the rear speakers get a filtered signal from the head unit, might not be the best place to tie in.
What is the plug in the corner by where the amp goes? I'm curious if they're using a similar vehicle harness and just bypassing the amp location...
But it should be pretty easy to grab a signal off either the head unit using a metra 70-xxxx and 71-xxx harnesses to make a pigtail, or jump over to tacotunes.com, and grab a tweeter wiring harness plug for the 16+ tacoma to get the signal after it leaves the head unit.
Also, previous gen install required different screws for mounting speaker rings like that. I just trimmed the adapters down on the corners with a router until the OEM screws grabbed.
|