Quote:
Originally Posted by 86league
Ohhhh - FL020 is the rear hub, CA000 is the front - yep.
|
Ah-ha! Looks like that's the answer...
Quote:
Then again - the guy at the subaru parts counter commented that he had seen a Looooooooot of these going through their department, and I might be better off leaving the advance auto "temporary" hub in place...
Are the OE still sourced from/made by timken and not in china somewhere at the same plant the aftermarket ones are made now?
|
I went through the original front bearings after 1 year of street and track (13 track days @ ~1hr/day). But my setup was garbage, 1.25" lowered on factory struts/shocks, the fronts were hard on the bump stops statically so I was seriously overloading the outside front during cornering. Replacements have lasted about 20 track days since then with improved setup but starting to hear them during cornering now.
Would be good to know if I ordered from Subaru whether they've gone to a cheaper source for these...