Quote:
Originally Posted by 86league
Then again - the guy at the subaru parts counter commented that he had seen a Looooooooot of these going through their department, and I might be better off leaving the advance auto "temporary" hub in place...
Are the OE still sourced from/made by timken and not in china somewhere at the same plant the aftermarket ones are made now?
|
I'd just run it till it dies, they are not hard to swap.
The last ones I got were timken, that was a couple years ago. I've tried one through autozone or orielly's and bought a front set from amazon labeled "Detroit" brand and all those only lasted like a season. I have one on my bench I have been meaning to cut apart to see what is going on. Maybe I will go stick it in the band saw now.