Quote:
Originally Posted by ZDan
Just checking...
I found two different part numbers:
28473FL020
28373CA000
I *think* the first one is for Brembos, as one link for the 2nd one says "w/o brembo"
TIA!
|
IDK why there would be any difference with the hub based on what caliper/rotor they bolt on. I put the 28373CA000 on my PP equipped car and they looked to be identical to what I took off and work fine. But honestly, I didn't check beyond what the subaru parts catalog told me I needed :
https://parts.subaru.com/a/Subaru_20...10-280-01.html
Ohhhh - FL020 is the rear hub, CA000 is the front - yep.
Quote:
Originally Posted by NoHaveMSG
I'd stick with OE. I tried using a couple other brands and the OE timkens last the longest.
|
Then again - the guy at the subaru parts counter commented that he had seen a Looooooooot of these going through their department, and I might be better off leaving the advance auto "temporary" hub in place...
Are the OE still sourced from/made by timken and not in china somewhere at the same plant the aftermarket ones are made now?