Quote:
Originally Posted by funkjaw
Currently trying to connect my laptop for the first time, and ESP (2.53.3) shows "ECU Disconnected"
Anyone have this problem? Battery is at 12.20v, everything else seems to work fuel pump comes on, cabin lights and so forth...
The Haltech has these lights illuminated:
|
Figured it out: I didn't hit "connect" under file.
Idiot of the year award goes to me!
Anyways for anyone curious. Once I was connected I went to "tools" and selected "Update ECU firmware to work with NSP". It went through it's process and closed ESP and opened up NSP after declaring I was all good to use NSP. In NSP it prompted me to update the firmware, but that I needed to do it via ESP.... ok. So I closed NSP, opened up ESP, selected "Update ECU firmware to work with NSP", again. It went through it's process, again, but this time it actually downloaded a new firmware file and installed it. Once done it automatically opened up NSP and I could now see I was on 3.0.0.1! Success.
Importing the ECU file from Kpower was straight forward, there were two things the ECU flagged however after importing; Vehicle input speed and traction control. I clicked on both flags and selected "clear" and they are now gone. Hopefully that was the correct action to take.