Quote:
Originally Posted by Turdinator
I do. I got used to monitoring my trims etc so i use the app and Bluetooth functions.
|
Ah I see. Right, unless the car is in Ignition or On with the engine running, my phone can’t find the Ecutek via Bluetooth so I’d think it’s not draining the battery
So I got the header installed:
Got the base map loaded on and sent Zach the first datalog. I was able to torque down all the nuts except for the one on the passenger side, mostly because I couldn’t quite get the socket fitted. Ended up just using a ratcheting wrench to tighten it down. Let me know if anyone has a recommendation on fitting a socket somehow so I can use my torque wrench to torque it down.