I’m relatively new to the platform so I’d appreciate any advice :P
This is the guide I plan on using as a reference:
https://www.partsdocs.com/Guide/How+...+Subaru+BRZ/39
-renting the o2 sensor from autozone
-ordered the Grimmspeed gaskets for the header side. Will be reusing stock ones for the FP side or source one locally if available at the dealer
-my understanding is that I need to bang on the skid plate a little bit to conform to the header shape
-my torque wrench recently crapped out. Any recommendation on one?
-do I need bolts or can I just reuse the stock ones ?
Anything else I’m missing?
