Quote:
Originally Posted by naviuk
Hello all.
Did anyone get to a solution here? we having the same issue.
We have DW 900's as Port injectors and i have sent the Latency/dead time according to 3bar base pressure. I have been hunting around and cannot find a conclusive answer to what the base pressure is, logging the car with ecutek the Fuel pressure - PI (Bar) has zeros throughout the logs....
We having the same issue around nasty start and initial idle and as per Steve99 you can see the PI are at 100% for a period and then it flips over to DI.
at WOT it is fantastic and when you get going it is also good but occasionally idle is iffy at best and cold start is terrible.
i've removed the Close loop fueling Racerom addition to see what affect this will have if any.
|
Fuel pressure from in tank pump is 60 psi or 4 bar, the low pressure in tank pump is not monitored no sensor only the di high pressure pump is monitored