Quote:
Originally Posted by CallmeDave
We got the new bypass valve installed. We found it easier to remove the AC condenser to gain access to install the bypass with the bracket installed.
Also note the size the difference in the old and new bypass.
|
Quote:
Originally Posted by SuperFR-S
Hi I've got an Edelbrock E-Force Supercharger on my FR-S, and my Bypass Actuator Valve recently went out. I bought a new one from Edelbrock that will come in tomorrow and I was curious if anyone in the group has replaced it before? And if so I've got a few Questions:
1. How hard is it to replace?
2. Do I need to remove the supercharger or is it possible to replace the valve with it still on?
3. Are there any tips or anything I should be on the lookout for when I replace it
|
This might help.
Quote:
Originally Posted by CallmeDave
We got the new bypass valve installed. We found it easier to remove the AC condenser to gain access to install the bypass with the bracket installed.
Also note the size the difference in the old and new bypass.
|
https://www.ft86club.com/forums/show...postcount=4203
There are photos in that link, not sure why I cant just quote it with the photos