For those that are interested in seeing another dyno plot of the 2022 BRZ here it is. We also installed both oil temp and oil pressure sensors, because that's what we do
The performance was remarkably consistent and made more power than I expected. Our Mustang AWD500-SE reads lower than the average Mustang Dyno, I expected this car to make ~185 at the wheels, but it made quite a bit more.
Interesting to note, the dash oil temp data was higher than what we were reading in the sump by 10-15° and the sump temperatures got cooler with each pull. Ambient temps were in the 60s. We'll likely datalog the oil pressure/temp again in the summer heat and see if the temps drop. For oil, we are running Amsoil Signature Series 0w-20.
For comparison's sake, here is a Gen 1 (tuned) that was run on our dyno a few years ago...
If anyone has any questions, ask away!
,