Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

toughguy39 · 04-14-2022, 09:33 PM

Hi guys,
Recently went in for maintenance, swear this is like the third post I've made in a month. What happens is after I drive off after I've given it time to warm up, when coming to a stop and putting the car to neutral the car dies. It doesn't happen every time maybe 40% of the time. There are some drives it doesn't even come close to stalling. The problem seems to happen when A: it's hot outside(90F) and/or B: I don't idle for like 10 minutes. Currently in the tuning process, I'm on the second tune from my tuner. I've emailed him and am waiting for a response. I also seem to be running a little lean (14.7-15.3 AFR) at idle. Fuel pressure being reported by the flex fuel kit is at 55PSI and I'm running 93 octane. Other than this problem she runs great.
Mod list(changed from since working):
Dw300c and id1050x injectors
Flex fuel kit
Boost controller
EVAP disconnected, hoses clamped
Spark plugs
Belt replacement
New intake filter
Cam plate replaced
2017 intake manifold

Any suggestions are greatly appreciated!

04-14-2022, 09:33 PM	#1
toughguy39 Member Join Date: May 2020 Drives: WRB Turbo Brz Location: TX Posts: 44 Thanks: 3 Thanked 6 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Brz doesn't like to idle Hi guys, Recently went in for maintenance, swear this is like the third post I've made in a month. What happens is after I drive off after I've given it time to warm up, when coming to a stop and putting the car to neutral the car dies. It doesn't happen every time maybe 40% of the time. There are some drives it doesn't even come close to stalling. The problem seems to happen when A: it's hot outside(90F) and/or B: I don't idle for like 10 minutes. Currently in the tuning process, I'm on the second tune from my tuner. I've emailed him and am waiting for a response. I also seem to be running a little lean (14.7-15.3 AFR) at idle. Fuel pressure being reported by the flex fuel kit is at 55PSI and I'm running 93 octane. Other than this problem she runs great. Mod list(changed from since working): Dw300c and id1050x injectors Flex fuel kit Boost controller EVAP disconnected, hoses clamped Spark plugs Belt replacement New intake filter Cam plate replaced 2017 intake manifold Any suggestions are greatly appreciated!