Quote:
Originally Posted by toughguy39
Hey so the driver side fuel rail cover is removed (Non-ECU Side). Need to trim it to fit the new intake manifold. Are there any grounds on that one? The one with the ECU (Passenger side) is installed and all bolts/Connectors installed that connect to the ECU.
|
No, just the passenger side is what will matter. There are other grounds, I believe one is on the block by the bell housing on the passenger side and the two on the underside of the engine on each valve cover to the chassis. At this point I don't think grounds are the issue.
I'd double check your install, then talk with your tuner. It's almost impossible for us to point you in a direction without a log.