Quote:
Originally Posted by Tokay444
Does this combo fit without clearance issues on the oem strut? What offset?
|
You'll need a +45 or higher to clear the oem strut and you'll be limiting the amount of camber you can get to do it, somewhere around -2 without plates and -3 with plates.
imho if you're on the oem (or an oem replacement like koni or bilstein) strut you're probably going to be served just fine by a 17x8 w/ 225/45/17 and more camber via camber bolts and maybe a camber plate.
This is all based on the mk1, I've heard rumors it's less good on the mk2 but haven't seen any proof. As above higher offset needed in the rear anyway so getting a +45 would be my baseline.
