Quote:
Originally Posted by Four_wheel_drifts
Has anyone with the swap tried to remove their transmission with the engine in place? The local tuning shop doing this swap found that there wasn’t enough clearance. So engine and transmission came out and the tunnel mounts were welded and redone.
[URL="https://www.dropbox.com/s/gtagsgwby3gz4oz/kpower%20BRZ%20trans%20mount.jpg?dl=URL]
It looks like it came from the factory this way. Absolutely beautiful.
|
I asked Kpower if it is possible, and they said yes, but that it was easier to do the engine and transmission together, which is what I did. Clearance is probably an issue, even with dropping the sway bar.