Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

AJ PwR · 07-31-2012, 08:19 PM

Thank you for your patience. We have finalized the design for our 70R Cat-back single exhaust for the FRS and BRZ. I believe we are the first to offer an exhaust in 70mm on the market at the moment. We have tested 2.5" pipe and we hardly see any gains so we tested with the 70 and now we talking

The exhaust is built with stainless 70mm (2.75") piping, single resonator on b-pipe and with 101mm (4") exhaust tip. We built the exhaust with horizontal muffler for better sound quality while maintaining exhaust flow. The entire cat-back system weighs 26 lbs.

Here we go

Dyno test was performed with DYNOCOM (hub dyno) and all numbers are SAE corrected. Dynoed with 5th gear which is 1:1 ratio !

The 70R exhaust gained 2-3whp across the band and 5.4whp at peak.

Now we will be finishing up building the over pipe and the secondary cat-delete pipe and we will hit the dyno again !

Here's the Video clip for the exhaust !

[ame="http://www.youtube.com/watch?v=_M58HG-gLSU"]http://www.youtube.com/watch?v=_M58HG-gLSU[/ame]

Stay tuned !

Cheers,

Ben @ AJR

07-31-2012, 08:19 PM	#1
AJ PwR Join Date: Jan 2012 Drives: R35 R56 CZ4A ZC6 Location: Vancouver B.C. Posts: 284 Thanks: 1 Thanked 190 Times in 77 Posts Mentioned: 6 Post(s)	T1R 70R Power exhaust Prototypes ! Thank you for your patience. We have finalized the design for our 70R Cat-back single exhaust for the FRS and BRZ. I believe we are the first to offer an exhaust in 70mm on the market at the moment. We have tested 2.5" pipe and we hardly see any gains so we tested with the 70 and now we talking The exhaust is built with stainless 70mm (2.75") piping, single resonator on b-pipe and with 101mm (4") exhaust tip. We built the exhaust with horizontal muffler for better sound quality while maintaining exhaust flow. The entire cat-back system weighs 26 lbs. Here we go Dyno test was performed with DYNOCOM (hub dyno) and all numbers are SAE corrected. Dynoed with 5th gear which is 1:1 ratio ! The 70R exhaust gained 2-3whp across the band and 5.4whp at peak. Now we will be finishing up building the over pipe and the secondary cat-delete pipe and we will hit the dyno again ! Here's the Video clip for the exhaust ! [ame="http://www.youtube.com/watch?v=_M58HG-gLSU"]http://www.youtube.com/watch?v=_M58HG-gLSU[/ame] Stay tuned ! Cheers, Ben @ AJR Last edited by AJ PwR; 08-03-2012 at 01:36 PM.