Quote:
Originally Posted by 86league
I think stock are 18mm with a 6mm backing plate
PP Brembo are ~15mm with a 5mm backing plate
Carbotech matched the numbers above for the stock. For the Brembo, Cobalt says 15.3, but the PFC pads I get measure about 14.8 with a 5mm backing plate.
Gray is roughly the AP pad shape. : 
Area/volume numbers are my estimates and may not be correct - the rest is from drawings from Cobalt Frictions website. |
That's a surprisingly small surface area on the AP pad - smaller than stock! Do you have a source for this?