Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Brake Pad Thickness

timurrrr · 02-10-2022, 04:37 AM

CSG front pads for the PP calipers have CSG.1001.16.xx part numbers.

I haven't measured the total thickness specifically, but I believe it's 16 mm

I measured the pad material however, and it was 10–11 mm, depending on the model and the batch. The 11 mm C1's were a bit challenging to squeeze into the caliper, there was almost no wiggle room left.

02-10-2022, 04:37 AM	#4
timurrrr Senior Member Join Date: May 2019 Drives: 2022 GR86 Location: Between Sonoma and Laguna Seca Posts: 1,726 Thanks: 2,145 Thanked 1,323 Times in 727 Posts Mentioned: 31 Post(s) Tagged: 1 Thread(s)	CSG front pads for the PP calipers have CSG.1001.16.xx part numbers. I haven't measured the total thickness specifically, but I believe it's 16 mm I measured the pad material however, and it was 10–11 mm, depending on the model and the batch. The 11 mm C1's were a bit challenging to squeeze into the caliper, there was almost no wiggle room left.