Quote:
Originally Posted by aw11
Actually I had a picture of it already in my camera roll. I shoved 2 pigtail wires, 1 from each pigtail, into the connector side and crimped it/added some solder to hopefully give it some strength.
I also had to cut one of the wires because I was getting an extra signal where I didn't want it.
So far this hodgepodge creation has held up to a couple track days and a bunch of autocrosses so I feel comfortable with it
|
I think I found the connectors at Ballenger Motorsports (
www.bmotorsports.com). These are the pre-pinned connects and it's just a matter of connecting the proper leads.
Part # Description
CONN-85836 4 Way Receptacle Pigtail for Subaru & Toyota Oxygen Sensor Cost $9.99 Qty 1
CONN-85835 4 Way Plug Pigtail for Subaru & Toyota Oxygen Sensor
Cost $9.99 Qty 2
$30 in total for parts. They do charge for shipping, so I'm about $40 in. I'll post a picture once I build my connector.