Quote:
Originally Posted by captain awesome
I updated to NSP and it's way nicer. However I looked in both and don't see where you can change the CABLE to TPS?
Also fixed my jerkyness at low RPM with light throttle input. The provided map runs 1% threshold arming of TPS. I went the opposite direction bumping it to 3% making it worse originally due to misunderstanding the function. Someone suggested I adjust it lower so I made it .5% and now it's working great. At least from the test miles I just ran so far.
|
When viewing a table, AFR map for instance, click the table axis setup next to the main setup tab. Once in there you can change the axis from cable to Dbw.