|
Thank you so much for confirming that. Ironically I've been debating that being the issue and already ordered Raceseng's spring perch and perch bushing! They will be here Friday!
FYI I contacted Raceseng prior to my post and they confirmed I didn't need their spring perch and bushing. They didn't say if it would increase my height though, weird they would say that if I purchased it forr the KW's directly. Though it does make sense because the rear ones I didn't use KW's either.
When looking at the diagrams in Raceseng's photos, they use the ones with their own spring perches. It does appear like it is "flat" instead of "cone" shaped like the KW's came with. It doesn't look like it would make up 1.5" of height though so we will see!
FYI the helper spring is completely flat (smashed) right now. I thought I could remove it, but it would be very loose if I did this unless I adjust the preload. Is that OK to remove it and then simply move the lower spring perch up to ensure their isn't slack? I'm sure it won't be "in spec" according to KW anymore... but I imagine I could at least get my ride height adjustments.
Finally, thank you for confirming that this could cause my "ratio" issue. I've always made sure to purchase coils that have independent ride height and pre-load. I've never had to adjust or be familiar with setups that have pre-load and ride height together!
|