|
Speaker Input Problem Redux
As stated above, I expected the AudioControl LGD to resolve the HU to AC amp issue. However, after installing first the blue AC LGD (100w) and then green AC LGD (50w) neither seemed to solve the problem.
The only sounds I can get are from the STOCK factory speakers I left in the back seat area. Using AC software I can link this source and send it to the front tweeters and woofers. This arrangement limits the flexibility and tuning of the front speakers. Also, importantly, it offers no low end frequencies for the subwoofer.
These blue LGD were first introduced in 2005 primarily for american brands. Subsequently a green version was produced as the condition spread and more recently a gray version. I don't know why the manufacturers are introducing these obstacles.
The net effect is the extensive manipulation of the sound frequency available with AC's software is handicapped and there is no sound for the subwoofer. As an aside, I used the MM as a "sacraficial wire loom" to tap into the speaker input. I went directly into the HU factory wires to power the stock, factory speakers.
AC tech support is looking into this but so far no solution. Any suggestions?
|