Still having issues with my MAP sensor. Hoping my buddy has the earlier version I can test otherwise I'll have to wait and see. I sent some follow up emails to John to see if maybe there is another issue with my harness but I think it's correct. Good news is it runs fine with the current setup, just not sure why that's the case.
Also looks like after cracking the cap on the coolant and topping it off one last time the thermostat is opening just fine again. I didn't bother trying to burp it again so I was surprised the lower hose was getting hot fluid like it should. I ran the car for about 40 minutes or so last night warming everything up and letting the fan cycle multiple times. Everything is working like it should minus the MAP.
Going to address the header and trans clearance this weekend so I'm not rushing it.
EDIT:
Just got a message back from John. He confirmed my wires are correct and said the following:
Quote:
|
Those negative readings seem pretty normal, I wouldn't worry too much about it.
|
So I guess the MAP sensor thing is a non issue. I'll focus on trying to get stuff less touchy touchy where they shouldn't be and start some road miles.