Quote:
Originally Posted by Saskatuon
i was thinking of this but there is really no room on the header itself with the rear 02 taking up most of the space. would the front of the front pipe be a good option? i haven't been under to see if it would have clearance yet.
|
I've also put a bung there. As long as you don't have a gasket leak between the output flange on the header and the input flange on the front pipe I think on the front pipe before any cats would also work. You may need to orient the bung so that when the sensor is installed that you don't have a space conflict between the installed sensor and the firewall when the front pipe is bolted up.