|
EcuFlash gets stuck at 0% when reading flash
I am having an issue reading my ECU with ECU flash, I an using a tactrix openport 2.0 to attempt to read the flash on my 2013 FR-S. I have tried waiting anywhere between 15 seconds to a few minutes in between turning the key to the on position and starting the read. I have tried using an OBD 2 extension cable and tried replacing the usb cable between the tactrix and the laptop but it always seems to get stuck right after "entering bootloader".
I am looking for some troubleshooting advice on this. I have updated the 32bitbase.xml and the ZA1JA01C.xml files and made sure I have the correct and most up to date drivers for the tactrix. I have all unnecessary accessories powered off when attempting to read the flash.
I have attached a screenshot of the ecuflash log.
|