Quote:
Originally Posted by Ashikabi
Helicoil will require an m8 tap unless you go down to a 5mm bolt. FYI.
If the pan is sealed to the block outside the ear then it shouldn't leak... Wait, is the bolt hole now exposed to the oil? You might have to use a "sealing washer" if that's the case.
Sent from my ONEPLUS A5010 using Tapatalk
|
Yeah, since the ear broke off, the bolt is now fully exposed to the oil, it theoretically shouldn't leak but there is a higher chance of it happening if I dont put the sealant on correctly or even enough of it.
I was going to focus putting a little bit more sealant around that bolt area and then using a jack and a piece of wood to add a little bit more tension to ensure the sealant is making full contact with the bottom side of the block.
Sent from my SM-G960U using Tapatalk