Quote:
Originally Posted by HellHat
He hasn't explained where he's getting his numbers from and insists that the scaling isn't the issue. I'm about as confused as you are.
That was an issue on the previous tune they were running before we swapped the MAP. It wouldn't be represented on the logs that I posted. The only issue I have now is the P0068 popping up once I hit about 7k. That and while the code is throwing the throttle will cut randomly. I think it only happens when it's under a certain load, but I'm honestly not sure.
Until he gets back to me, I'm kinda dead in the water. He said something about rebuilding the file for a different year, but who knows when that will happen
|
Well, two things then: have him explain the 21psi thing because that makes no sense from your logs, and it could explain the problem, and maybe try having him disable that DTC or changing the sensitivity or threshold that makes it activate. That could be risky, but it might be necessary to see the problem and to rule out a sensor issue.