[Ashikabi]

Originally Posted by maciekg9

Hello everyone, recently I've bought crashed toyota 86 after lift. At first the engine was starting normally, but after removing all front parts (lights, bonnet, bumper, fenders, front reinforcement and air filter housing box) the engine won't start. When I try to start it, it cranks, so seems like the starter works and then it ceases and fails to run the actual engine and goes out with a giant puff sound. My guess is that engine got blocked because of lack of air filter box. What do you guys think?

Also after crash, both driver and passenger airbags got activated and seatbealts got blocked. I will replace it with new ones, but my question is what else needs to be done. I've read that airbag sensor crash data needs to be removed, but what about impact sensors? Are they one-time use only? I've checked them, and they are all fine from an external point of view and not burnt. Or maybe there is some else part to replace?

Thanks in advance

I think sensors are one time use. The SMS module can be reprogrammed (the dealer won't tell you that though)

Sent from my ONEPLUS A5010 using Tapatalk