Quote:
Originally Posted by Boomerang
You should be logging the following according to stevos MAF scaling thread;
Fuel system status ol/cl
AFR (actual measured by O2 sensor
Commanded AFR ( from OL Fueling table data)
LTFT
STFT
LOAD
MAF Volts
Throttle position
IAT
RPM
|
Updated the log to include those things, just dont have the command afr logged
https://datazap.me/u/sam86/log-16344...x=7537.00&hg=1
My AFR seems to be around 12.6-12.9 at 6-7k RPMS which is why I chose the 4% rich tune.
My LTFT is about 2+ during that time which I assume is positive? (Again I had just topped up my tank before doing this log)
2nd log of the Rich 2% tune, adding 2% more fuel over the previous log. It appears this tune is making me run extremely rich now? Getting 11.3-11.8 AFR during 6-6.8k rpms. Don't know why it's such a big difference over the previous tune
https://datazap.me/u/sam86/rich2-tun...38&tmax=689.55
