Quote:
Originally Posted by dpfarr
So I finally figured out how to log w ecutek.
Looks like my MAP is showing 2.67 as a static value while my car is running. The fuel rail pressure is erratic while running. I was recording it while holding throttle and then let it die. It was ~20 MPa and fell quickly.
I sent this to my tuner.
Lastly, did I fuck up and not dump my stock rom to save a stock file to program? I didn’t figure out how to flash to stock. Is this a generic file ecutek can provide?
Log: https://drive.google.com/file/d/1VGF...w?usp=drivesdk |
It looks like you are having the same issue I had on my install. Is your car just dumping fuel? I could hold the idle up but it would be pouring black smoke out the exhaust.
I had a cut wire on my map sensor. I didn't see it during install but after rooting around for a day I saw the end poking out of the loom protector. I don't think I still have the picture I sent to delicious but start at the sensor and work your way back down the harness. If it's not getting the 5v input it defaults to whatever the max is. Easy way to check is just unplug the sensor and watch your map reading.