Ok I'm working with my tuner again trying to get my car back to where it was, things are better but definitely still having issues. I've got a new revision that helped out my fuel trims but still feeling an intermittent hesitation/miss. Not knocking his work at all, he's understandably busy so I'm just looking for a second set of eyes while I wait.
Where I feel the car having issues seems to be correlated to the map sensor bouncing around in the logs. Not sure if my sensor is going bad or if its just a symptom of some other issue. The sensor is a FBM 4 bar thats about 2 years old.
Here's a startup and idle log. There's one spot in there where the car had some issues
https://datazap.me/u/motox16/91-startup?log=0&data=30
Here's the first WOT log I took. Things look alright with a small bobble on the map sensor around 4k
https://datazap.me/u/motox16/912-wot-1?log=0&data=30
The second WOT log. Map sensor is jumping all over the place, could feel the boost changing as the car accelerated.
https://datazap.me/u/motox16/912-wot-2?log=0&data=30
Thank you all for the help!
__________________
2017 Subaru BRZ PP
FBM Turbo Kit: GTX3076R - HRI FlexFuel Tune - 3" Turboback Exhaust - ID1000cc Injectors - Walbro 485 Fuel Pump - FBM Oil Pan - FBM Oil Cooler - Killer B Oil Pickup - FBM Catch Can - FBM Radiator w/Fan Shroud - Clutch Masters FX400 - Verus Clutch Fork/Pivot - IRP Shifter - Cusco Engine/Trans Mounts - RCE Yellow Springs - PS4S 245/40/17