+1 on this. At this point you'll have to check every electrical harness connection /sensor /GND look at the pins to make there there's no damage or seating issues. Also did you attached the 2 ground wires on each side of the engine on the bottom. THey're thin ground wires and some people break them while lifting the engine and forget to reconnect.
Or your ECU is somehow damaged
Quote:
Originally Posted by Dzmitry
Weird. Seems like everything is working. It's almost as if the ECU is not recognizing fuel flow or something like that. You got a few misfires there. With LTFT and STFT still not showing, I would think some kind of sensors or something along the lines are not working or not installed properly. The ECU is seeing this and shutting the car off as it doesn't believe it is getting fuel to some extent?? I don't know, because it is recognizing the fuel pump duty % and quantity.
|